Last weekend I took the time to experiment with the ATX-1080 antenna. My expectations of this type of antennas have never been high. Now I have a somewhat different view.
In the limited manual of this antenna is discussed by making a counterpoise for them as possible to function. This manual is a guideline given for each band. After some soldering,cut and try, I came to the following lengths:
A counterpoise for 20M, length approximately 3.9M
A counterpoise for 17M, length approximately 3M
A counterpoise for 10M, length approximately 2M
30M
Almost 3 segments of the telescope extended, counterpoise for 20M in use.
20M
10 segments of the telescope extended, counterpoise for 20M in use.
17M
5 segments of the telescope extended, counterpoise for 17M in use.
12M
8 extended segments of the telescope, counterpoise for 10M in use.
10M
10 segments of the telescope extended, counterpoise for 10M in use.
During these experiments, I made a few QSO's:
9A2YM (20M cw)
OK1AUZ (20M cw)
UA1CE (20M cw)
SV2HJQ (20M ssb)
On the Friday before I made 2 QSO's with Lithuania on 30M.
At all QSO's I had an output of 2.5 Watts. My FT817nd was on the dining table (see) with rear mounted antenna. The counterpoise lying on the ground.
73, Tjeerd (Gose) - PA3GNZ
Monday 19 July 2010
Wednesday 14 July 2010
First qso with ATX-1080 antenna and 2,5 watts
Last week I bought a second hand ATX-1080 antenna for my FT817nd. Yesterday I received it by the mail and today I had the time to try this antenna.With a cup of coffee I sat quietly at my diningroom table and listened to 20 meters, swr reasonable. I heard the special call SI9AM, this time with ON5RZ as a guest operator. A lot of stations called him and it seemed that he not heard my QRP signal. Nevertheless, my patience was rewarded. Raf said my call with an error and I answered to it. He corrected my call and we could made a nice QSO. Details of my setup passed and I told my name.
Who knows what for fun this antenna gives me even more.73, Tjeerd (Gose) - PA3GNZ
Friday 2 July 2010
Limerick Sudden receiver, by GQRP club
This week, no radio activities. The weather is too hot for hanging over the soldering iron and I am home with a painful ear infection.
By post was the latest Journal of the club GQRP 'Sprat'. A Magazine with always interesting articles. By this time the announcement of a kit what the GQRP club is sold. The Limerick Sudden Receiver.
73, Tjeerd (Gose) - PA3GNZ
By post was the latest Journal of the club GQRP 'Sprat'. A Magazine with always interesting articles. By this time the announcement of a kit what the GQRP club is sold. The Limerick Sudden Receiver.
73, Tjeerd (Gose) - PA3GNZ
Monday 21 June 2010
Contest on 6 meter
Saturday afternoon, I was listening on 6M because there were conditions. I heard that there was a contest and on the internet I found out what kind of contest this was. I came to the following information. In this contest you change a report, serial number and locator.
Among the other activities, see previous posting, I have made a total of 20 QSO's.
In this picture are the lines through the various contacts visible. Clearly the most possibilities were to eastern Europe. The farthest distance was with UU9A in KN64SM, over 2000km.
I made the qso's with cw/ssb and the most with 20 watts, 2 with 10 watts. From the 20 qso's there were also a few new squares: JM68, JN94, KN44, KN64, JO91 and KO14.
73, Tjeerd (Gose) - PA3GNZ
Among the other activities, see previous posting, I have made a total of 20 QSO's.
In this picture are the lines through the various contacts visible. Clearly the most possibilities were to eastern Europe. The farthest distance was with UU9A in KN64SM, over 2000km.I made the qso's with cw/ssb and the most with 20 watts, 2 with 10 watts. From the 20 qso's there were also a few new squares: JM68, JN94, KN44, KN64, JO91 and KO14.
73, Tjeerd (Gose) - PA3GNZ
Saturday 19 June 2010
Genesis Q5 (30M) transmitter repaired and modified
Today I repaired my Genesis Q5 transmitter.
First I had to remove transistor T2 and then I could remove the IC. Then I placed the new IC and I measured that the oscillator was working, yes!
Now I could replace transistor T2 and the transmitter was working again, the frequency 10.11574, it's too low. (When you've read my previous article about the Q5, you could see that with the value of 33pF (C7) the frequency was nearly 10.117 Mhz. The 33pF which I installed today was another.
I received the advice to change capacitor C7. First I replaced this by one with a value of 22pf. I measured that the frequency was 10.12012, much too high. The next step was placing a capacitor with a value of 27pF.
The transmit frequency is 10.11595. This deviation from 10.116 Mhz is acceptable for me.
I finally placed the 27pF capacitor.
73, Tjeerd (Gose) - PA3GNZ
First I had to remove transistor T2 and then I could remove the IC. Then I placed the new IC and I measured that the oscillator was working, yes!
Now I could replace transistor T2 and the transmitter was working again, the frequency 10.11574, it's too low. (When you've read my previous article about the Q5, you could see that with the value of 33pF (C7) the frequency was nearly 10.117 Mhz. The 33pF which I installed today was another.
I received the advice to change capacitor C7. First I replaced this by one with a value of 22pf. I measured that the frequency was 10.12012, much too high. The next step was placing a capacitor with a value of 27pF.
The transmit frequency is 10.11595. This deviation from 10.116 Mhz is acceptable for me. I finally placed the 27pF capacitor.
73, Tjeerd (Gose) - PA3GNZ
Subscribe to:
Posts (Atom)
