Wednesday 27 February 2013

The resistors are mounted, Iler20 project

Last weekend I started, after reading the manual several times, with soldering the resistors on the PCB.
Iler20 project
All 51 resistors are mounted, except P3, the AF control.
The next step are the capacitors. I'm lucky that I didn't continue directly with it.
Today I got a email from Javier,EA3GCY, the developer of this kit. In this email he write that it's better to use 12 pF for the capacitors C15 to C19, instead of 22pF. With the value of 22pF the IF bandwidth is below 2KHz. Properly to small for SSB.

Thanks for this advice Javier!


73, Tjeerd (Gose) - PA3GNZ

Monday 18 February 2013

Preparing Iler20 transceiver project.

Last weekend, 9 and 10 February, I participated in the PACC contest.
For many years I'm operator by PA6W, in Tiel. Under this call we participate in the MOST class. This time with 5 operators, normal 7. Given the number of QSO's for us it has been a very successful contest.
I'm also busy with the preparations for the Iler20 project.

Iler20 projectI have found in the "junk box" a nice new box.
iler20 project
For tuning, I search for a "Ventier Dial", such a knob I have also on my 20 Howes transceiver. On Ebay I found a supplier in the USA. Saturday the knob was delivered by postmen.

Last week I had the opportunity to buy an EndFed 10/20/40 for a reasonable price. This EndFed made ​​by PAR Electronics in the USA.
The first results are promising. Nice reception at 40M. On 20M it need some help from the internal tuner, my 5 watts CW signal heard by a skimmer station in the USA and Canada. At 10M it was quite good and I could, with a output of 20 watts, work 3 stations, with CW, from the USA.

73, Tjeerd (Gose) - PA3GNZ

Wednesday 6 February 2013

Iler20 transceiver kit building

Yesterday afternoon, the postman delivered the long-awaited package from Spain.
A large envelope containing the components for the Iler20 20M ssb transceiver to build.
Iler20
I start with the description carefully and try next week to start with soldering. Check my blog frequently to follow this Iler20 project.


73, Tjeerd (Gose) - PA3GNZ