Friday, 30 July 2010

My homebrew corner.

This week I walked around in my house with my camera and came up with the idea of yet another new picture of my homebrew corner. This is the result. On the desk are the components of the Limerick Sudden receiver project I'm doing.

Limerick Sudden receiverAs the manual shows I started assembling the IC holders for the LM386 and NE612.



I haven't found more time in the past week for this project.

Wednesday afternoon I had a qso with SM3YQX/4. Lars Erik, 30 km west of the town Mora. He worked with 100W in a dipole, I with 2.5 W in the ATX-1080.

Good weekend all.

73, Tjeerd (Gose) - PA3GNZ

Monday, 26 July 2010

QSO on 20M & Limerick Sudden receiver

Today I have made a cw qso on 20M with HA8LTQ. It was a "normal" qso where we both could share our details, like: name, name of the town and the equipment we used. This was on my side the FT817nd with 2.5 watts and the ATX-1080 antenna on the back of the set mounted.

Today I prepare the sides of the print and enclosure for the Limerick Sudden receiver with a neat file. Next week I can start soldering, as there is time.

73, Tjeerd (Gose) - PA3GNZ

Sunday, 25 July 2010

My activity of this day.

Today during the IOTA contest, I had the opportunity to try my ATX-1080 antenna on 15M. I'm getting a good swr with the following settings:
15M
10 segments of the telescope extended, counterpoise for 17M in use.

Then I made connections with: Poland, Sweden and the Czech Republic, unfortunately, no stations on an island. My conclusion is that this antenna on 15M will work. On 20M I worked 2 stations in Romania and Sweden, all with SSB and 2,5 Watts.

Today I did nothing with the Limerick Sudden receiver project. Yesterday I only snapped the front and back panels from the mainboard. Tomorrow I smooth the snapped edges with emery paper.

73, Tjeerd (Gose) - PA3GNZ

Thursday, 22 July 2010

Limerick Sudden receiver

Limerick Sudden receiver PA3GNZYesterday I opened the envelope of this kit to verify that all components are in the packaging.





In the manual there is a list of components and I soon found out that all these components are present.Limerick Sudden receiver PA3GNZThis weekend I read the manual and make a plan how I going to start the building.
My idea is to make the wiring to the antenna connector with RG174 coax and not with the twisted wire which is written in the manual. For the antenna connector, I like to use a BNC chassis instead of a RCA chassis.

I'll keep you posted about this project.

73, Tjeerd (Gose) - PA3GNZ

Monday, 19 July 2010

Experiments with the ATX-1080 antenna

Last weekend I took the time to experiment with the ATX-1080 antenna. My expectations of this type of antennas have never been high. Now I have a somewhat different view.

In the limited manual of this antenna is discussed by making a counterpoise for them as possible to function. This manual is a guideline given for each band. After some soldering,cut and try, I came to the following lengths:
A counterpoise for 20M, length approximately 3.9M
A counterpoise for 17M, length approximately 3M
A counterpoise for 10M, length approximately 2M

30M
Almost 3 segments of the telescope extended, counterpoise for 20M in use.
20M
10 segments of the telescope extended, counterpoise for 20M in use.
17M
5 segments of the telescope extended, counterpoise for 17M in use.
12M
8 extended segments of the telescope, counterpoise for 10M in use.
10M
10 segments of the telescope extended, counterpoise for 10M in use.

During these experiments, I made a few QSO's:
9A2YM (20M cw)
OK1AUZ (20M cw)
UA1CE (20M cw)
SV2HJQ (20M ssb)
On the Friday before I made 2 QSO's with Lithuania on 30M.

At all QSO's I had an output of 2.5 Watts. My FT817nd was on the dining table (see) with rear mounted antenna. The counterpoise lying on the ground.

73, Tjeerd (Gose) - PA3GNZ