During our stay in the Algarve, Portugal, we saw some lighthouses."Farol da ponta da piedade"
The highlight was the lighthouse "Farol de S. Vicente". It was open to the public, a unique.
"Farol de S. Vicente"
1 hour ago
Friday, 26 November 2010
Lighthouses in Portugal
During our stay in the Algarve, Portugal, we saw some lighthouses."Farol da ponta da piedade"
The highlight was the lighthouse "Farol de S. Vicente". It was open to the public, a unique.
"Farol de S. Vicente"
Monday, 22 November 2010
QSL received
a few days before my trip to Portugal, I was at the monthly meeting where I can bring and get the QSL.
There were a fair number of QSL's for me, including some remarkable.
There were QSL's of the QSO's with OK1AUZ and 8S0C. Both QSO's are made with my FT817 + ATX1080 antenna and 2.5 watts output. My setup was on the dinertable.
73, Tjeerd (Gose) - PA3GNZ
There were a fair number of QSL's for me, including some remarkable.There were QSL's of the QSO's with OK1AUZ and 8S0C. Both QSO's are made with my FT817 + ATX1080 antenna and 2.5 watts output. My setup was on the dinertable.
73, Tjeerd (Gose) - PA3GNZ
Sunday, 17 October 2010
WSPR & Homebrew
From Friday night my FT950 was running with WSPR on 40M. Given the results, I think that the conditions are not so good.
My 5 watts signal is heard by 4X1RF several times, a distance of over 3000km. 4X1RF was also my longest distance I received.
In 2 newsletters of the Benelux QRP Club is an article by Albert PA3EKN about an universal cw transmitter. The crystal, some capacitors and inductors are the determining factor for the hamband used.
Albert described this project in newsletter 64 and 96.
In the junkbox I found the PCB of this project with the crystal 3.582 MHz, not very useful for QRP. I ordered crystals for different QRP frequencies, including 3.560 MHz, by Genesis Radio in Australia. This past week I have installed. The transmitter works for the first time very close to the desired frequency. With tuning C1, transmit frequency is 3.560 MHz.
To be continued ......
73, Tjeerd (Gose) - PA3GNZ
My 5 watts signal is heard by 4X1RF several times, a distance of over 3000km. 4X1RF was also my longest distance I received.
In 2 newsletters of the Benelux QRP Club is an article by Albert PA3EKN about an universal cw transmitter. The crystal, some capacitors and inductors are the determining factor for the hamband used.
Albert described this project in newsletter 64 and 96.
In the junkbox I found the PCB of this project with the crystal 3.582 MHz, not very useful for QRP. I ordered crystals for different QRP frequencies, including 3.560 MHz, by Genesis Radio in Australia. This past week I have installed. The transmitter works for the first time very close to the desired frequency. With tuning C1, transmit frequency is 3.560 MHz.
To be continued ......73, Tjeerd (Gose) - PA3GNZ
Saturday, 9 October 2010
QRV from Zuidlaren, JO33IC
Last weekend I was in Zuidlaren for a few days, JO33IC. On Friday I setup my station, FT817 + 10dB attenuator. And the 30M ZEPP on the topfloor and a few meters outside. With WSPR I used only 50mW.
I made also a few cw/qqb qso's on 30 and 40 meters.
73, Tjeerd (Gose) - PA3GNZ
I made also a few cw/qqb qso's on 30 and 40 meters.73, Tjeerd (Gose) - PA3GNZ
Monday, 27 September 2010
WSPR on 30M
After a long time I'm qrv again on 30M with WSPR.
This time with my FT817nd with battery power and the ATX1080 antenna mounted on the back of the set. Mostly just listen, otherwise the battery is empty very soon.
Visit this link to see the results
73, Tjeerd (Gose) - PA3GNZ
This time with my FT817nd with battery power and the ATX1080 antenna mounted on the back of the set. Mostly just listen, otherwise the battery is empty very soon.Visit this link to see the results
73, Tjeerd (Gose) - PA3GNZ
Subscribe to:
Posts (Atom)
