With 1 watts via WSPR to VK!

Yesterday my WSPR station listen and transmit on 40M. A lot of stations received my signals from 1 watts down to 50mW. VK6BN received my 1 watts more then one period.In the begin of the evening (May 7) I made my first qso on 10M for this season. S58P gave me a 55 with my 5 watts in SSB.

73, Tjeerd (Gose) - PA3GNZ

With 1 watts to VK via WSPR!

Yesterday in the evening I setup my station for WSPR on 30M. Around 19:00 UTC 2 VK stations heard my 1 watts signal, VK2/VK6DI and VK2DAP. Distances around 16500 km.Later in the evening I made 2 CW qso's on 30M. Worked with OM30CAQ and a longer qso with SP7HOV, Zbig in Skierniewice. Both qso's with only 1 watts.

On my laptop I don't have the possibility to make graphics for my Blog. When I'm back home I update the Blog with pictures.

73, Tjeerd (Gose) - PA3GNZ

QRV again!

After a holiday of a few days in the province of Friesland I'm in Zuidlaren (JO33IC).

Yesterday in the afternoon I start up the station for WSPR. The best DX was K1JT, he heard my 500mW signal.Today my WSPR station is running on 10M and OY1OF heard my 1 Watts signal for one period. PE4BAS and PC1CP heard my signal serveral times. from 5 watts to 50mW.

On 40M I made 1 CW qso with DF3MI in QTH Oberammergau. A 2way QRP QSO.

73, Tjeerd (Gose) - PA3GNZ

WSPR on 30M, heard in Australia

Today I was around 16:00 UTC at home and switch on the WSPR program. This means that with an interval of about 12 minutes there is a broadcast of almost 2 minutes.
Almost every broadcast of my signal is heard in Australia. It seems that the propegation is going up.I'm using my FT950 with 5 watts and the magnetic-loop inside my house.

73, Tjeerd (Gose) - PA3GNZ

EZ Tele XL mast

Last year I bought in Germany a AZ Tele XL mast with a length of 12 meters. This mast landed in my shed until today.











Along with Eric, PE1FES, I gone a few km outside of Tiel and went on a quiet road, where we have the mast setup in the grass.
Despite the weather, with occasional clouds and some rain also it blew hard. This was immediately noticed when we had the mast extended. The top curve somewhat by the wind.
Our conclusion was that one set of 3 guy wires, such as the mast is supplied isn’t enough.
The idea is now to make a point about halfway to where another 3 guy wires coming.

Who has already experience with this mast? What should I do to make it stronger?