Worked with: UR5URW in KO50FF (ssb) and UX1BZ in KN29VA (cw). KN29 is a new square for me. Heard also other stations but it was crowded and there was a lot of fading on the signals.
Enjoy your Whitsun weekend.
73, Tjeerd (Gose) - PA3GNZ
Worked with: UR5URW in KO50FF (ssb) and UX1BZ in KN29VA (cw). KN29 is a new square for me. 
2 qso's and both a new square. I'm waithing for the next Es opening on 6M, I hope signals will be stronger then today.
On Wednesday I had the whole day WSPR on 10M running. During this time I heard no signals from other WSPR stations. My signal was heard by 2 stations for a period.
This is a qso I made with my homemade Rockmite with a power of approximately 300mW. The confirmation of this QSO made the confirmed DXCC countries with QRP on 52.
In the begin of the evening (May 7) I made my first qso on 10M for this season. S58P gave me a 55 with my 5 watts in SSB.
Later in the evening I made 2 CW qso's on 30M. Worked with OM30CAQ and a longer qso with SP7HOV, Zbig in Skierniewice. Both qso's with only 1 watts.
Today my WSPR station is running on 10M and OY1OF heard my 1 Watts signal for one period. PE4BAS and PC1CP heard my signal serveral times. from 5 watts to 50mW.
I'm using my FT950 with 5 watts and the magnetic-loop inside my house.
Yesterday I was at the annual meeting of the SRS/BQC. The program included 2 lectures:
Photo's made by PA1AT
The experiments with WSPR had only played on 30M. I felt that the propagation was not good and was afraid that they didn’t heard my 50mW signal. First I switched to 100mW and it went. Later in the day my 50mW signal was heard. Distances were between 600 and 1200 km.
Picture of activity on 40M.
Drawing made by PA1B
In the evening I receive not to much cause interference in the reception by TV. Unfortunately my antenna can not be build up outside my apartment.
Today I set the filter in my FT950 at 850 Hz, this was on 1500Hz before.
