Sunday 17 May 2015

JT65 digitale mode HF

Enkele weken geleden heb ik kennis gemaakt met een digitale mode die op de HF banden gebruikt wordt. Lang heb ik digitale modes geweerd uit de shack. In beperkte mate ben ik over stag gegaan.

Over het gebruik van digitale modes heb ik een bepaalde mening, na de start met JT65 is dit niet veranderd. Digitale modes zijn in mijn ogen modes die tot stand komen door een paar knoppen (macro's) op je pc in te drukken.
Zo heeft JT65 een bepaalde format wat als compleet qso wordt beschouwd.

Het bovenstaande qso was met een station op Malta. Je wisselt een rapport uit en bevestigd dit met een R (roger). Heel af en toe wordt er via vrije tekst nog vermeld wat het vermogen en antenne is.

In het begin maakte ik gebruik van 25 watt. Al vrij gauw ben ik overgestapt naar 5 watt, en heel af en toe 10 watt.
Joe Taylor (K1JT) heeft deze mode bedoeld als weak signal mode.

De combinatie QRP met de antenne experimenten maakt deze mode voor mij af en toe leuk om mee te werken. Daarnaast is het een uitstekende mode als mijn YL in het andere deel van de huiskamer TV kijkt of een boek leest.

Is het automatisch maken van een qso door de pc de volgende stap? In mijn ogen is er dan geen sprake meer van een hobby.:-)

73, Tjeerd (Gose) - PA3GNZ

Friday 27 February 2015

Pictures from space...

From time to time the astronauts from ISS do some amateur radio experiments. In the period February 22-24 there was the possibility to receive SSTV images from the ISS. All this in the 2M amateur band.

In the past I had been active via the RS10 and RS10 satellites and therefore it seemed nice to do again this experiment, despite my modest antenna for 2m.
ISS SSTV PA3GNZ
First of all I downloaded and installed the MMSTV program and viewed to the most actual Keppler data. In this 3 days I have had a several SSTV images seen coming live on my pc. Basically you do not need to be by your PC. Is it still a hobby?
ISS SSTV PA3GNZ
The last picture I have received via the RX-SSTV program. This program was created specially for SSTV images from space.
ISS SSTV PA3GNZ

My station:
Yaesu FT-7800
Mobile whip on the radiator.
SignaLink modem
Software: MMSTV and RX SSTV.

73, Tjeerd (Gose) - PA3GNZ

Tuesday 3 February 2015

Iler20 project

It's a long time since I've published an article on my blog. There were several reasons but special because I was not so busy with the radio hobby.

Now I have picked up the Iler20 project. On the main board there more and more parts but sadly lacking a few. I've written about this to Javier and now the missing parts have gone with mail to me. Good service from Javier.
Iler20 project
Last weekend I soldered all the components on the AGC board. A real challenge for me because the print is quite small. With patience and perseverance I succeeded.

I'm continue with the main board

73, Tjeerd (Gose) - PA3GNZ

Thursday 8 May 2014

QSL OA1F

The information for QSL on the internet is very negative. That's the reason I write on my Blog.

On qrz.com you can see an address in Spain. I have send my QSL to this address and after only waiting a week this is the result.
Good quick service and ignore the negative posts on the Internet.

73, Tjeerd (Gose) - PA3GNZ

Wednesday 27 February 2013

The resistors are mounted, Iler20 project

Last weekend I started, after reading the manual several times, with soldering the resistors on the PCB.
Iler20 project
All 51 resistors are mounted, except P3, the AF control.
The next step are the capacitors. I'm lucky that I didn't continue directly with it.
Today I got a email from Javier,EA3GCY, the developer of this kit. In this email he write that it's better to use 12 pF for the capacitors C15 to C19, instead of 22pF. With the value of 22pF the IF bandwidth is below 2KHz. Properly to small for SSB.

Thanks for this advice Javier!


73, Tjeerd (Gose) - PA3GNZ